We Are Selling a Second-Hand SLITTING BONAK Line!

Great Opportunity to Acquire a BONAK Slitting Line at an Exceptional Price

Completely optimized by the BONAK team for immediate use, with brand-new electrical equipment.

Manufactured in 1995, this line was operational until 2024, when it was replaced with a higher-performance model.

Line Specifications:

• Material Types: Cold-rolled steel, hot-rolled steel, galvanized steel, and pickled steel. Mechanical properties: S235JR to S355JR.
• Coil Specifications:
  • Coil width: Maximum 1550mm, Minimum 500mm.
  • Sheet thickness: Maximum 6mm, Minimum 0.5mm.
  • Outer diameter: Max Ø2200mm, Min Ø900mm.
  • Inner diameter: Ø508 / Ø610 / Ø762 / Ø850.
  • Coil weight: Up to 25 tons.
• Cutting Capacity:
  • Speed of 60 m/min for thicknesses >3mm to 6mm.
  • Speed of 120 m/min for thicknesses 0.5mm to 3mm.
• Line Components:
  • Coil saddle.
  • Coil Car (Pit Type).
  • Double ended uncoiler with expandable mandrels (manufactured in 2014).
  • Previous straightener and slitting shear.
  • Motorized entry guides to slitter.
  • Replaceable slitter head.
  • Scrap recoiler.
  • Junction table and pit.
  • Tension stand.
  • Strip Recoiler.
  • Strip separator arm.
  • Unloading coil car.
  • Two arm turnstile.
• Additional Features:
  Includes a computerized tooling set capable of handling up to 20 cuts.

If you are interested, do not hesitate to contact us through “Contact” section.

See the line in action at the following link:: SECOND HAND SLITTING LINE